SODIUM LIGNOSULFONATE MSDS

Material Safety Data Sheet

 

Section 1-Chemical Product and Company Identification

Trade Name of Product: Sodium lignosulfonate

Synonym: Sodium lignosulfonate

Chemical name:Lignosulfonate acid Sodium salt

Chemical Formula:not available

Contact Information

Headquarter

Address:Lizeyayuan Apartment,South West Station Road,Fengtai District,Beijing,China

Zip code:100072

Branch Address.WestXinluo St. High-tech Dist, Jinan, Shandong ,China.

Email:info@greenagrochem.com

Http://www.greenagrochem.com

Section 2-Composition Information on Ingredients

 

Name Sodium Lignosulphonate Grade One Sodium lignosulfonate Grade Two Sodium lignosulfonate Grade Three
Product Code  GAC-NaLS-1  GAC-NaLS-2  GAC-NaLS-3
Appearance Yellow Brown powder  Brown powder Brown powder
PH value      7.0-9.5  9.0-13.0 4-7
Dry maters      95%min  95%min  95%min
Water-insoluble      1.5%max  2%max  2%max
Water Reducing Capacity       8%min  5%min  8%min
Sulphate      2-5 (%)  0  1-2%
Calcium and magnesium      0.5max  0.5max  5%around
Lignosulphonate      55%min  60%min 50%min
Reducing Sugar      7%max  7%max  10%min
Moisture      7%Max  7%max  7%max

 

CAS.8061 51 6

Section 3-Hazards Identification

Potential Acute Health Effects:no specific information available in our databank regarding the acute effect of this material for humans.

Route of Entry: Eyes, Inhalation, Skin and Ingestion

Section 4-First Aid Measures

Inhalation: Remove person to fresh air and support breathing as needed, Seek medical attention if

irritation persists.

Ingestion :Seek medical attention or call a poison control center immediately.

Skin: No poisonous to skin. Remove contaminated clothing and wash before reusing. Flush skin with water, and then wash with soap and water. Seek medical attention if skin becomes irritated.

Eye:In such case flush eye immediately for at leat 10 minutes .Get medical attention.

Section 5-Fire and Explosion Hazard Data

Flammability of the product:may be combustible at high temperature.

Flash point: Non-available

Flammable limits: Non-available

Product of combustion:Non-available

Special remarks on fire hazards:Non-available

Special remarks on explosion hazards:Non-available

Section 6- Accidental Release Measures

Small Spills: Clean up personnel should protect against mist inhalation and skin contact. Avoid generating mists, Spills when handling should be cleaned up immediately to prevent spreading.

Large Spills:use a shovel to put the material into a convenient wast disposal container.Finish cleaning by spreading water on the contaminated surface and allow to evaluate through the sanitary system.

Section 7- Precautions for Safe Handling and Use

Precautions to be taken in handling and storing: Store in cool, dry areas away from children, feed and food products and sources of heat, Immediately clean up spills that occur during handling or storage.

Protect from freezing keep containers closed when not in use.

Section 8-Exposure Controls /Personal Protection

Occupational Exposure Limits:

No value assigned for this specific material by the New Zealand Occupational Safety and Health Service (OSH). However, Workplace Exposure Standard(s) for particulates:Particulates not otherwise classified: 8hr WES-TWA 10 mg/m3 (inhalable dust) or 3 mg/m3 (respirable dust)As published by the New Zealand Occupational Safety and Health Service (OSH).

WES – TWA (Workplace Exposure Standard – Time Weighted Average) – The eight-hour, time-weighted average exposure standard is designed to protect the worker from the effects of long-term exposure.These Exposure Standards are guides to be used in the control of

occupational health hazards. All atmospheric contamination should be kept to as low a level as is workable. These exposure standards should not be used as fine dividing lines between safe and dangerous concentrations of chemicals. They are not a measure of relative toxicity.

Engineering controls:

Ensure ventilation is adequate to maintain air concentrations below Exposure Standards. Avoid generating and breathing in dusts. Use with local exhaust ventilation or while wearing dust mask. Keep containers closed when not in use.

Personal Protective Equipment:

The selection of PPE is dependant on a detailed risk assessment. The risk assessment should consider the work situation,the physical form of the chemical, the handling methods, and environmental factors.Orica Personal Protection Guide No. 1, 1998: E – OVERALLS, SAFETY SHOES, SAFETY GLASSES, GLOVES, DUSTMASK. Wear overalls, safety glasses and impervious gloves. Avoid generating and inhaling dusts. If excessive dust exists, wear dust mask/respirator meeting the requirements of AS/NZS 1715 and AS/NZS 1716. Always wash hands before smoking,eating, drinking or using the toilet. Wash contaminated clothing and other protective equipment before storage or re-use.

 Section 9-Physical/Chenmical Characteristics

Physical state and appearance :Powder solid

Order:slight

Molecular weight:Not available

Color:yellow brown

Boiling point:Not available

Melting point:Not available

Critical temperature:Not available

Specific gravity:Not available

Vapor pressure:Not available

Vapor density:Not available

Solubility:easy soluble in cold water and hot water.

Section 10-Reactivity Data

Stability:Product stable at room temperature in closed containers under normal storage and handling conditions

Chemical Incompatibilities:Strong bases and Acids

Condition to avoid:Avoid excessive heat.

Section 11-Toxicological Information

Eye Effects:Irritation

Skin Effects:May cause irritation

Acute Inhalation Effects:Not Determined

Chronic Effects:No unusual chronic effects

Carcinogenicity:Not listed as carcinogenic

Section 12-Ecoligical Information

Soil Absorption/Mobility:Mobile in soil profile

Section 13-Disposal Considerations

Disposal:Dispose of in an approved landfill or apply at recommended label rates.

Disposal Regulatory Requirement:Follow applicable Federal,State and local regulations

Section 14-Transport Information

Not regulated by the DOT

Section 15-Regulatory Information

Sudden Release of Pressure:No Immediate:YES

Fire:No Delayed:No

Reactive:No

Section 16-Other

Disclaimer:All information appearing herein is based upon data obtained from manufactuers and/or recognized technical

sources. While the information is believed to be accurate, we make no representations as to its accuracy or sufficiency.

POTASSIUM FULVATE MSDS

Material Safety Data Sheet

Section 1 – Chemical Product and Company Identification

MSDS Name: Potassium Fulvate
Company Identification:

SAINT HUMIC ACID CO.,LIMITED

Beijing Office :Lizeyayuan Apartment,South West Station Road,Fengtai District,Beijing

Zip code:100072

Jinan Office :West Xinluo St.,High-Tech Dist,Jinan, Shandong,China

Zip:250101

Tel:(+86)-15650025726

Email:info@humicacidinc.com

Http://www.cnhumicacid.com

Http://www.humicacidinc.com

 

 

Section 2 – Composition, Information on Ingredients

 

 Appearance Black Powder Black Powder Black Flake
 Product code SHA-KFA-1-P SHA-KFA-2-P SHA-KFA-2-F
 Water-solubility 100% 100% 100%
Potassium(K₂O dry basis) 12.0% min 12.0% min 12.0% min
 Moisture 15.0% max 15.0% max 15.0% max
 Humic Acid(dry basis) 50.0% min 60.0% min 60.0% min
 Fulvic Acid(dry basis) 20% min 10% min 10% min
 pH 9.0-10.0 9.0-10.0 9.0-10.0
 Mesh 60 600 600
 Partical size / 2-4mm 2-4mm

 

 

 

CAS# Chemical Name HA Percent EINECS/ELINCS
  68514-28-3 Potassium Fulvate 50.0min 271-030-1
Section 3 – Hazards Identification

EMERGENCY OVERVIEW

Appearance: Not available.
The toxicological properties of this material have not been fully investigated. Use appropriate procedures to prevent opportunities for direct contact with the skin or eyes and to prevent inhalation.

Section 4 – First Aid Measures

Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.
Skin: Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Ingestion: If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation: Get medical aid immediately. Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Notes to Physician: Treat symptomatically and supportively.

Section 5 – Fire Fighting Measures

General Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
Extinguishing Media: Use water spray, dry chemical, carbon dioxide, or appropriate foam.
Flash Point: Not applicable.
Autoignition Temperature: Not applicable.
Explosion Limits, Lower: N/A
Upper: N/A
NFPA Rating: (estimated) Health: 0; Flammability: 0; Instability: 0

Section 6 – Accidental Release Measures

General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks: Clean up spills immediately, observing precautions in the Protective Equipment section. Sweep up or absorb material, then place into a suitable clean, dry, closed container for disposal. Avoid generating dusty conditions. Provide ventilation.

Section 7 – Handling and Storage

Handling: Wash thoroughly after handling. Use with adequate ventilation. Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation.
Storage: Store in a tightly closed container. Store in a cool, dry, well-ventilated area where is away from incompatible substances.

Section 8 – Exposure Controls, Personal Protection

Engineering Controls: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits

Chemical Name ACGIH NIOSH OSHA – Final PELs
Potassium Fulvate none listed none listed none listed

OSHA Vacated PELs: Potassium Fulvate: No OSHA Vacated PELs are listed for this chemical.
Personal Protective Equipment
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA’s eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin: Wear appropriate protective gloves to prevent skin exposure.
Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators: Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

Section 9 – Physical and Chemical Properties

Physical State: Solid
Appearance: black powder or granule
Odor: Not available.
pH: 9-10
Vapor Pressure: Not available.
Vapor Density: Not available.
Evaporation Rate: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Decomposition Temperature: Not available.
Solubility: easy soluble.
Specific Gravity/Density: Not available.
Molecular Formula: Not available.
Molecular Weight: Not available.

Section 10 – Stability and Reactivity

Chemical Stability: Stable under normal temperatures and pressures.
Conditions to Avoid: Incompatible materials, dust generation.
Incompatibilities with Other Materials: Not available.
Hazardous Decomposition Products: Not available.
Hazardous Polymerization: Has not been reported.

Section 11 – Toxicological Information

RTECS#:
CAS# 68514-28-3

LD50/LC50:
Not available.
Carcinogenicity:
CAS# 68514-28-3: Not listed by ACGIH, IARC, NTP, or CA Prop 65.

Epidemiology: No information available.
Teratogenicity: No information available.
Reproductive Effects: No information available.

Mutagenicity: No information available.
Neurotoxicity: No information available.
Other Studies:

Section 12 – Ecological Information

No information available.

Section 13 – Disposal Considerations

Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste. Additionally, waste generators must consult state and local hazardous waste regulations to ensure complete and accurate classification.
RCRA P-Series: None listed.
RCRA U-Series: None listed.

Section 14 – Transport Information

 

US DOT Canada TDG
Shipping Name: Not regulated as a hazardous material No information available.
Hazard Class: No NO
UN Number:
Packing Group:

 

Section 15 – Regulatory Information

US FEDERAL

TSCA
CAS# 68514-28-3 is listed on the TSCA inventory.
Health & Safety Reporting List
None of the chemicals are on the Health & Safety Reporting List.
Chemical Test Rules
None of the chemicals in this product are under a Chemical Test Rule.
Section 12b
None of the chemicals are listed under TSCA Section 12b.
TSCA Significant New Use Rule
None of the chemicals in this material have a SNUR under TSCA.
CERCLA Hazardous Substances and corresponding RQs
None of the chemicals in this material have an RQ.
SARA Section 302 Extremely Hazardous Substances
None of the chemicals in this product have a TPQ.
Section 313      No chemicals are reportable under Section 313.
Clean Air Act:
This material does not contain any hazardous air pollutants.
This material does not contain any Class 1 Ozone depletors.
This material does not contain any Class 2 Ozone depletors.
Clean Water Act:
None of the chemicals in this product are listed as Hazardous Substances under the CWA.
None of the chemicals in this product are listed as Priority Pollutants under the CWA.
None of the chemicals in this product are listed as Toxic Pollutants under the CWA.
OSHA:
None of the chemicals in this product are considered highly hazardous by OSHA.
STATE
CAS# 68514-28-3 is not present on state lists from CA, PA, MN, MA, FL, or NJ.
California Prop 65
California No Significant Risk Level: None of the chemicals in this product are listed.
Canada – DSL/NDSL
CAS#  68514-28-3 is not listed on Canada’s DSL List.
Canada – WHMIS
WHMIS: Not available.

Section 16 – Additional Information

MSDS Creation Date: 09/20/2016
Revision #5 Date: 09/20/2026

The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall Fisher be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Fisher has been advised of the possibility of such damages.

 

FULVIC ACID MSDS

Material Safety Data Sheet

Section 1 – Chemical Product and Company Identification

MSDS Name: Fulvic Acid
Company Identification

SAINT HUMIC ACID CO.,LIMITED

Beijing Office :Fengtai District,Beijing

Email:info@humicacidinc.com

info@cnhumicacid.com

Http://www.humicacidinc.com

Http://www.cnhumicacid.com

 

 

Section 2 – Composition, Information on Ingredients

 

 Appearance Black Powder Black Powder Black Powder
 Product code SHA-FA-1 SHA-FA-2 SHA-FA-3
 Water-solubility 100% 100% 100%
 Potassium(K₂O dry basis) 10.0% min 10%min /
 Moisture 15% max 15% max 15% max
 C.E.C 1200meq/100g min 1500meq/100g min 1600meq/100g min
 Fulvic Acid(dry basis) 30% min 50% min 60% min
 pH 6.0-7.0 9.0-10.0 9.0-10.0
 Mesh 60mesh 60mesh 60mesh
CAS# Chemical Name FA Percent EINECS/ELINCS
  479-66-3  Fulvic Acid 30.0min 271-030-1

 

Section 3 – Hazards Identification

 

 

 

 

EMERGENCY OVERVIEW

Appearance: Not available.
The toxicological properties of this material have not been fully investigated. Use appropriate procedures to prevent opportunities for direct contact with the skin or eyes and to prevent inhalation.

Section 4 – First Aid Measures

Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.
Skin: Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Ingestion: If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation: Get medical aid immediately. Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Notes to Physician: Treat symptomatically and supportively.

Section 5 – Fire Fighting Measures

General Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
Extinguishing Media: Use water spray, dry chemical, carbon dioxide, or appropriate foam.
Flash Point: Not applicable.
Autoignition Temperature: Not applicable.
Explosion Limits, Lower: N/A
Upper: N/A
NFPA Rating: (estimated) Health: 0; Flammability: 0; Instability: 0

Section 6 – Accidental Release Measures

General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks: Clean up spills immediately, observing precautions in the Protective Equipment section. Sweep up or absorb material, then place into a suitable clean, dry, closed container for disposal. Avoid generating dusty conditions. Provide ventilation.

Section 7 – Handling and Storage

Handling: Wash thoroughly after handling. Use with adequate ventilation. Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation.
Storage: Store in a tightly closed container. Store in a cool, dry, well-ventilated area where is away from incompatible substances.

Section 8 – Exposure Controls, Personal Protection

Engineering Controls: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits

Chemical Name ACGIH NIOSH OSHA – Final PELs
479-66-3 none listed none listed none listed

OSHA Vacated PELs: Fulvic Acid: No OSHA Vacated PELs are listed for this chemical.
Personal Protective Equipment
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA’s eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin: Wear appropriate protective gloves to prevent skin exposure.
Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators: Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

Section 9 – Physical and Chemical Properties

Physical State: Solid
Appearance: black powder or granule
Odor: Not available.
pH: 9-10
Vapor Pressure: Not available.
Vapor Density: Not available.
Evaporation Rate: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Decomposition Temperature: Not available.
Solubility: easy soluble.
Specific Gravity/Density: Not available.
Molecular Formula: Not available.
Molecular Weight: Not available.

Section 10 – Stability and Reactivity

Chemical Stability: Stable under normal temperatures and pressures.
Conditions to Avoid: Incompatible materials, dust generation.
Incompatibilities with Other Materials: Not available.
Hazardous Decomposition Products: Not available.
Hazardous Polymerization: Has not been reported.

Section 11 – Toxicological Information

RTECS#:
CAS# 479-66-3

LD50/LC50:
Not available.
Carcinogenicity:
CAS# 479-66-3: Not listed by ACGIH, IARC, NTP, or CA Prop 65.

Epidemiology: No information available.
Teratogenicity: No information available.
Reproductive Effects: No information available.

Mutagenicity: No information available.
Neurotoxicity: No information available.
Other Studies:

Section 12 – Ecological Information

No information available.

Section 13 – Disposal Considerations

Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste. Additionally, waste generators must consult state and local hazardous waste regulations to ensure complete and accurate classification.
RCRA P-Series: None listed.
RCRA U-Series: None listed.

Section 14 – Transport Information

 

  US DOT Canada TDG
Shipping Name: Not regulated as a hazardous material No information available.
Hazard Class: No NO
UN Number:    
Packing Group:    

 

Section 15 – Regulatory Information

US FEDERAL

TSCA
CAS# 479-66-3 is listed on the TSCA inventory.
Health & Safety Reporting List
None of the chemicals are on the Health & Safety Reporting List.
Chemical Test Rules
None of the chemicals in this product are under a Chemical Test Rule.
Section 12b
None of the chemicals are listed under TSCA Section 12b.
TSCA Significant New Use Rule
None of the chemicals in this material have a SNUR under TSCA.
CERCLA Hazardous Substances and corresponding RQs
None of the chemicals in this material have an RQ.
SARA Section 302 Extremely Hazardous Substances
None of the chemicals in this product have a TPQ.
Section 313      No chemicals are reportable under Section 313.
Clean Air Act:
This material does not contain any hazardous air pollutants.
This material does not contain any Class 1 Ozone depletors.
This material does not contain any Class 2 Ozone depletors.
Clean Water Act:
None of the chemicals in this product are listed as Hazardous Substances under the CWA.
None of the chemicals in this product are listed as Priority Pollutants under the CWA.
None of the chemicals in this product are listed as Toxic Pollutants under the CWA.
OSHA:
None of the chemicals in this product are considered highly hazardous by OSHA.
STATE
CAS# 479-66-3 is not present on state lists from CA, PA, MN, MA, FL, or NJ.
California Prop 65
California No Significant Risk Level: None of the chemicals in this product are listed.
Canada – DSL/NDSL
CAS# 479-66-3 is not listed on Canada’s DSL List.
Canada – WHMIS
WHMIS: Not available.

Section 16 – Additional Information

MSDS Creation Date: 09/20/2016
Revision #5 Date: 09/20/2026

The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall Fisher be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Fisher has been advised of the possibility of such damages.

 

SODIUM HUMATE MSDS

Material Safety Data Sheet

Section 1 – Chemical Product and Company Identification

MSDS Name: Sodium Humate 
Company Identification:

SAINT HUMIC ACID CO.,LIMITED

Beijing Office :Fengtai,Beijing

Email:info@cnhumicacid.com

Email:info@humicacidinc.com

Http://www.cnhumicacid.com

Http://www.humicacidinc.com

Section 2 – Composition, Information on Ingredients

 

 Appearance Black Crystal Black Powder Black Crystal Black Powder
 Product code SHA-NaHA-2 SHA-NaHA-2 SHA-NaHA-3 SHA-NaHA-3
Water-solubility 100% 100% 90%min 90%min
 Mesh / 60 / 60
 Particle size 2-4mm / 2-4mm /
Humic Acid(dry basis) 65.0% min 65.0% min 50.0% min 50.0% min
 pH 9-10 9-10 9-10 9-10

 

 

CAS# Chemical Name HA Percent EINECS/ELINCS
  68131-04-4 Sodium Humate 50.0min 271-030-1
Section 3 – Hazards Identification

EMERGENCY OVERVIEW

Appearance: Not available.
The toxicological properties of this material have not been fully investigated. Use appropriate procedures to prevent opportunities for direct contact with the skin or eyes and to prevent inhalation.

Section 4 – First Aid Measures

Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.
Skin: Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Ingestion: If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation: Get medical aid immediately. Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Notes to Physician: Treat symptomatically and supportively.

Section 5 – Fire Fighting Measures

General Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
Extinguishing Media: Use water spray, dry chemical, carbon dioxide, or appropriate foam.
Flash Point: Not applicable.
Autoignition Temperature: Not applicable.
Explosion Limits, Lower: N/A
Upper: N/A
NFPA Rating: (estimated) Health: 0; Flammability: 0; Instability: 0

Section 6 – Accidental Release Measures

General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks: Clean up spills immediately, observing precautions in the Protective Equipment section. Sweep up or absorb material, then place into a suitable clean, dry, closed container for disposal. Avoid generating dusty conditions. Provide ventilation.

Section 7 – Handling and Storage

Handling: Wash thoroughly after handling. Use with adequate ventilation. Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation.
Storage: Store in a tightly closed container. Store in a cool, dry, well-ventilated area where is away from incompatible substances.

Section 8 – Exposure Controls, Personal Protection

Engineering Controls: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits

Chemical Name ACGIH NIOSH OSHA – Final PELs
Sodium humate none listed none listed none listed

OSHA Vacated PELs: Sodium Humate: No OSHA Vacated PELs are listed for this chemical.
Personal Protective Equipment
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA’s eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin: Wear appropriate protective gloves to prevent skin exposure.
Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators: Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

Section 9 – Physical and Chemical Properties

Physical State: Solid
Appearance: black powder or granule
Odor: Not available.
pH: 10-12
Vapor Pressure: Not available.
Vapor Density: Not available.
Evaporation Rate: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Decomposition Temperature: Not available.
Solubility: easy soluble.
Specific Gravity/Density: Not available.
Molecular Formula: Not available.
Molecular Weight: Not available.

Section 10 – Stability and Reactivity

Chemical Stability: Stable under normal temperatures and pressures.
Conditions to Avoid: Incompatible materials, dust generation.
Incompatibilities with Other Materials: Not available.
Hazardous Decomposition Products: Not available.
Hazardous Polymerization: Has not been reported.

Section 11 – Toxicological Information

RTECS#:
CAS#68131-04-4

LD50/LC50:
Not available.
Carcinogenicity:
CAS# 68131-04-4: Not listed by ACGIH, IARC, NTP, or CA Prop 65.

Epidemiology: No information available.
Teratogenicity: No information available.
Reproductive Effects: No information available.

Mutagenicity: No information available.
Neurotoxicity: No information available.
Other Studies:

Section 12 – Ecological Information

No information available.

Section 13 – Disposal Considerations

Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste. Additionally, waste generators must consult state and local hazardous waste regulations to ensure complete and accurate classification.
RCRA P-Series: None listed.
RCRA U-Series: None listed.

Section 14 – Transport Information

 

US DOT Canada TDG
Shipping Name: Not regulated as a hazardous material No information available.
Hazard Class: No NO
UN Number:
Packing Group:

 

Section 15 – Regulatory Information

US FEDERAL

TSCA
CAS# 68131-04-4is listed on the TSCA inventory.
Health & Safety Reporting List
None of the chemicals are on the Health & Safety Reporting List.
Chemical Test Rules
None of the chemicals in this product are under a Chemical Test Rule.
Section 12b
None of the chemicals are listed under TSCA Section 12b.
TSCA Significant New Use Rule
None of the chemicals in this material have a SNUR under TSCA.
CERCLA Hazardous Substances and corresponding RQs
None of the chemicals in this material have an RQ.
SARA Section 302 Extremely Hazardous Substances
None of the chemicals in this product have a TPQ.
Section 313      No chemicals are reportable under Section 313.
Clean Air Act:
This material does not contain any hazardous air pollutants.
This material does not contain any Class 1 Ozone depletors.
This material does not contain any Class 2 Ozone depletors.
Clean Water Act:
None of the chemicals in this product are listed as Hazardous Substances under the CWA.
None of the chemicals in this product are listed as Priority Pollutants under the CWA.
None of the chemicals in this product are listed as Toxic Pollutants under the CWA.
OSHA:
None of the chemicals in this product are considered highly hazardous by OSHA.
STATE
CAS# 68131-04-4 is not present on state lists from CA, PA, MN, MA, FL, or NJ.
California Prop 65
California No Significant Risk Level: None of the chemicals in this product are listed.
Canada – DSL/NDSL
CAS# 68131-04-4 is not listed on Canada’s DSL List.
Canada – WHMIS
WHMIS: Not available.

Section 16 – Additional Information

MSDS Creation Date: 09/20/2016
Revision #5 Date: 09/20/2026

The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall Fisher be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Fisher has been advised of the possibility of such damages.

 

HUMIC ACID MSDS

Material Safety Data Sheet

Section 1 – Chemical Product and Company Identification

MSDS Name: Humic Acid
Company Identification:

SAINT HUMIC ACID CO.,LIMITED

Beijing Office :Fengtai District,Beijing

Email:info@humicacidinc.com

info@cnhumicacid.com

Http://www.humicacidinc.com

Http://www.cnhumicacid.com

 

 

Section 2 – Composition, Information on Ingredients

 

 Appearance Black Powder Black Granule Black Powder Black Granule
 Product code SHA-HA-1-P SHA-HA-1-G SHA-HA-2-P SHA-HA-2-G
Organic Matter(dry basis) 85.0%min 85%min 80.0%min 80%min
 Solubility NO NO NO NO
 C.E.C ≥350meq/100g ≥300meq/100g ≥350meq/100g ≥300meq/100g
 Humic Acid(dry basis) 60.0%min 60%min 50.0%min 50%min
 Particle size /mesh 60mesh 2-4mm 60mesh 2-4mm
Granule Radial Load 0 12N 0 12N
 pH 4-6 4-6 4-6 4-6

 

CAS# Chemical Name HA Percent EINECS/ELINCS
  1415-93-6 Humic Acid 50.0min 271-030-1

 

 

Section 3 – Hazards Identification

 

EMERGENCY OVERVIEW

Appearance: Not available.
The toxicological properties of this material have not been fully investigated. Use appropriate procedures to prevent opportunities for direct contact with the skin or eyes and to prevent inhalation.

Section 4 – First Aid Measures

Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.
Skin: Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Ingestion: If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation: Get medical aid immediately. Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Notes to Physician: Treat symptomatically and supportively.

Section 5 – Fire Fighting Measures

General Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
Extinguishing Media: Use water spray, dry chemical, carbon dioxide, or appropriate foam.
Flash Point: Not applicable.
Autoignition Temperature: Not applicable.
Explosion Limits, Lower: N/A
Upper: N/A
NFPA Rating: (estimated) Health: 0; Flammability: 0; Instability: 0

Section 6 – Accidental Release Measures

General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks: Clean up spills immediately, observing precautions in the Protective Equipment section. Sweep up or absorb material, then place into a suitable clean, dry, closed container for disposal. Avoid generating dusty conditions. Provide ventilation.

Section 7 – Handling and Storage

Handling: Wash thoroughly after handling. Use with adequate ventilation. Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation.
Storage: Store in a tightly closed container. Store in a cool, dry, well-ventilated area where is away from incompatible substances.

Section 8 – Exposure Controls, Personal Protection

Engineering Controls: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits

Chemical Name ACGIH NIOSH OSHA – Final PELs
1415-93-6 none listed none listed none listed

OSHA Vacated PELs: Humic Acid: No OSHA Vacated PELs are listed for this chemical.
Personal Protective Equipment
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA’s eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin: Wear appropriate protective gloves to prevent skin exposure.
Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators: Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

Section 9 – Physical and Chemical Properties

Physical State: Solid
Appearance: black powder or granule
Odor: Not available.
pH: 9-10
Vapor Pressure: Not available.
Vapor Density: Not available.
Evaporation Rate: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Decomposition Temperature: Not available.
Solubility: easy soluble.
Specific Gravity/Density: Not available.
Molecular Formula: Not available.
Molecular Weight: Not available.

Section 10 – Stability and Reactivity

Chemical Stability: Stable under normal temperatures and pressures.
Conditions to Avoid: Incompatible materials, dust generation.
Incompatibilities with Other Materials: Not available.
Hazardous Decomposition Products: Not available.
Hazardous Polymerization: Has not been reported.

Section 11 – Toxicological Information

RTECS#:
CAS# 1415-93-6

LD50/LC50:
Not available.
Carcinogenicity:
CAS# 1415-93-6: Not listed by ACGIH, IARC, NTP, or CA Prop 65.

Epidemiology: No information available.
Teratogenicity: No information available.
Reproductive Effects: No information available.

Mutagenicity: No information available.
Neurotoxicity: No information available.
Other Studies:

Section 12 – Ecological Information

No information available.

Section 13 – Disposal Considerations

Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste. Additionally, waste generators must consult state and local hazardous waste regulations to ensure complete and accurate classification.
RCRA P-Series: None listed.
RCRA U-Series: None listed.

Section 14 – Transport Information

 

  US DOT Canada TDG
Shipping Name: Not regulated as a hazardous material No information available.
Hazard Class: No NO
UN Number:    
Packing Group:    

 

Section 15 – Regulatory Information

US FEDERAL

TSCA
CAS# 1415-93-6is listed on the TSCA inventory.
Health & Safety Reporting List
None of the chemicals are on the Health & Safety Reporting List.
Chemical Test Rules
None of the chemicals in this product are under a Chemical Test Rule.
Section 12b
None of the chemicals are listed under TSCA Section 12b.
TSCA Significant New Use Rule
None of the chemicals in this material have a SNUR under TSCA.
CERCLA Hazardous Substances and corresponding RQs
None of the chemicals in this material have an RQ.
SARA Section 302 Extremely Hazardous Substances
None of the chemicals in this product have a TPQ.
Section 313      No chemicals are reportable under Section 313.
Clean Air Act:
This material does not contain any hazardous air pollutants.
This material does not contain any Class 1 Ozone depletors.
This material does not contain any Class 2 Ozone depletors.
Clean Water Act:
None of the chemicals in this product are listed as Hazardous Substances under the CWA.
None of the chemicals in this product are listed as Priority Pollutants under the CWA.
None of the chemicals in this product are listed as Toxic Pollutants under the CWA.
OSHA:
None of the chemicals in this product are considered highly hazardous by OSHA.
STATE
CAS# 1415-93-6 is not present on state lists from CA, PA, MN, MA, FL, or NJ.
California Prop 65
California No Significant Risk Level: None of the chemicals in this product are listed.
Canada – DSL/NDSL
CAS#  1415-93-6 is not listed on Canada’s DSL List.
Canada – WHMIS
WHMIS: Not available.

Section 16 – Additional Information

MSDS Creation Date: 09/20/2016
Revision #5 Date: 09/20/2026

The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall Fisher be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Fisher has been advised of the possibility of such damages.

 

Potassium Humate MSDS

Material Safety Data Sheet

Section 1 – Chemical Product and Company Identification

MSDS Name: Potassium Humate 
Company Identification:

SAINT HUMIC ACID CO.,LIMITED

Beijing Office :Fengtai District,Beijing

Email:info@humicacidinc.com

info@cnhumicacid.com

Http://www.humicacidinc.com

Http://www.cnhumicacid.com

 

 

Section 2 – Composition, Information on Ingredients

 

 Appearance Black Crystal/Powder Black Powder
 Product code SHA-KHA-2 SHA-KHA-3
 Water-solubility 95% 90%
 Potassium(K₂O dry basis) 10.0% min 10.0% min
 Moisture 15.0% max 15.0% max
 Humic Acid(dry basis) 60.0% min 50.0% min
 Fulvic Acid(dry basis) 1% min 1% min
 PH 9.0-10.0 9.0-10.0
 Sieve residue (0.5mm) 5.0% max 5.0% max
 Partical size 2-5mm 2-5mm

 

 

 

CAS# Chemical Name HA Percent EINECS/ELINCS
  68514-28-3 Potassium Humate 50.0min 271-030-1
Section 3 – Hazards Identification

EMERGENCY OVERVIEW

Appearance: Not available.
The toxicological properties of this material have not been fully investigated. Use appropriate procedures to prevent opportunities for direct contact with the skin or eyes and to prevent inhalation.

Section 4 – First Aid Measures

Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.
Skin: Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Ingestion: If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
Inhalation: Get medical aid immediately. Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Notes to Physician: Treat symptomatically and supportively.

Section 5 – Fire Fighting Measures

General Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
Extinguishing Media: Use water spray, dry chemical, carbon dioxide, or appropriate foam.
Flash Point: Not applicable.
Autoignition Temperature: Not applicable.
Explosion Limits, Lower: N/A
Upper: N/A
NFPA Rating: (estimated) Health: 0; Flammability: 0; Instability: 0

Section 6 – Accidental Release Measures

General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks: Clean up spills immediately, observing precautions in the Protective Equipment section. Sweep up or absorb material, then place into a suitable clean, dry, closed container for disposal. Avoid generating dusty conditions. Provide ventilation.

Section 7 – Handling and Storage

Handling: Wash thoroughly after handling. Use with adequate ventilation. Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation.
Storage: Store in a tightly closed container. Store in a cool, dry, well-ventilated area where is away from incompatible substances.

Section 8 – Exposure Controls, Personal Protection

Engineering Controls: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits

Chemical Name ACGIH NIOSH OSHA – Final PELs
Potassium humate none listed none listed none listed

OSHA Vacated PELs: Potassium Humate: No OSHA Vacated PELs are listed for this chemical.
Personal Protective Equipment
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA’s eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin: Wear appropriate protective gloves to prevent skin exposure.
Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators: Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

Section 9 – Physical and Chemical Properties

Physical State: Solid
Appearance: black powder or granule
Odor: Not available.
pH: 10-12
Vapor Pressure: Not available.
Vapor Density: Not available.
Evaporation Rate: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: Not available.
Decomposition Temperature: Not available.
Solubility: easy soluble.
Specific Gravity/Density: Not available.
Molecular Formula: Not available.
Molecular Weight: Not available.

Section 10 – Stability and Reactivity

Chemical Stability: Stable under normal temperatures and pressures.
Conditions to Avoid: Incompatible materials, dust generation.
Incompatibilities with Other Materials: Not available.
Hazardous Decomposition Products: Not available.
Hazardous Polymerization: Has not been reported.

Section 11 – Toxicological Information

RTECS#:
CAS# 68514-28-3

LD50/LC50:
Not available.
Carcinogenicity:
CAS# 68514-28-3: Not listed by ACGIH, IARC, NTP, or CA Prop 65.

Epidemiology: No information available.
Teratogenicity: No information available.
Reproductive Effects: No information available.

Mutagenicity: No information available.
Neurotoxicity: No information available.
Other Studies:

Section 12 – Ecological Information

No information available.

Section 13 – Disposal Considerations

Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste. Additionally, waste generators must consult state and local hazardous waste regulations to ensure complete and accurate classification.
RCRA P-Series: None listed.
RCRA U-Series: None listed.

Section 14 – Transport Information
US DOT Canada TDG
Shipping Name: Not regulated as a hazardous material No information available.
Hazard Class: No NO
UN Number:
Packing Group:
Section 15 – Regulatory Information

 

US FEDERAL

TSCA
CAS# 68514-28-3 is listed on the TSCA inventory.
Health & Safety Reporting List
None of the chemicals are on the Health & Safety Reporting List.
Chemical Test Rules
None of the chemicals in this product are under a Chemical Test Rule.
Section 12b
None of the chemicals are listed under TSCA Section 12b.
TSCA Significant New Use Rule
None of the chemicals in this material have a SNUR under TSCA.
CERCLA Hazardous Substances and corresponding RQs
None of the chemicals in this material have an RQ.
SARA Section 302 Extremely Hazardous Substances
None of the chemicals in this product have a TPQ.
Section 313      No chemicals are reportable under Section 313.
Clean Air Act:
This material does not contain any hazardous air pollutants.
This material does not contain any Class 1 Ozone depletors.
This material does not contain any Class 2 Ozone depletors.
Clean Water Act:
None of the chemicals in this product are listed as Hazardous Substances under the CWA.
None of the chemicals in this product are listed as Priority Pollutants under the CWA.
None of the chemicals in this product are listed as Toxic Pollutants under the CWA.
OSHA:
None of the chemicals in this product are considered highly hazardous by OSHA.
STATE
CAS# 68514-28-3 is not present on state lists from CA, PA, MN, MA, FL, or NJ.
California Prop 65
California No Significant Risk Level: None of the chemicals in this product are listed.
Canada – DSL/NDSL
CAS#  68514-28-3 is not listed on Canada’s DSL List.
Canada – WHMIS
WHMIS: Not available.

Section 16 – Additional Information

MSDS Creation Date: 09/20/2016
Revision #5 Date: 09/20/2026

The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall Fisher be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Fisher has been advised of the possibility of such damages.

 

Potassium Humate and its Details

Potassium humate is one of important humic acid salts.Sodium Humate ,ammonium humate,potasium humate are all humic acids salt,but potassium humate is most important.

Potassium Humate is in crystal,powder,flakes form completely water soluble .Can be used as fertigation fertilizers and spray fertilizer mixed with NPK or other fertlizers.

Potassium humate function

1.Potassium humate work as base fertilizer can increase the soil organic carbon and increase soil organic matter.Another thing will increase the capability to bind the Nitrogen and slow release .Also can increase the phosphorous utilization,As it can chelate the Al3+and Fe3+ release the phospheros.Also it will chelate the trace elements increase its utility.

2.Will create a good living condition for all microbial ,thus these microbial will improve the soil structure.Accordingly  will increase the soil fertilizer.

3.Will detoxify the residules of pesticide on fruits and crops and increase the quality.

Application

1.All crops

2.Fruits and vegetable

3.Herb medicine and tabacoo

 

Potassium Humate

Product Description

Potassium humate is humic acid potassium salt, soluble in water. With good effect to stabilize and slow release nitrogen,liberate phosphorous in soil,can improve soil structure, increase soil fertility and increase harvest.

Main Specification

Potassium Humate Crystal Potassium Humate  Powder

 

 Appearance Black Crystal/Powder Black Powder
 Product code SHA-KHA-2 SHA-KHA-3
 Water-solubility 95% 90%
 Potassium(K₂O dry basis) 10.0% min 10.0% min
 Moisture 15.0% min 15.0% min
 Humic Acid(dry basis) 60.0% min 50.0% min
 Fulvic Acid(dry basis) 1% min 1% min
 PH 9.0-10.0 9.0-10.0
 Sieve residue (0.5mm) 5.0% max 5.0% max
 Partical size 2-5mm 2-5mm

Higher Grade Potassium humate: Super potassium humate

Main Function

1).Greatly increase the soil fertility,especial mixed with Urea ,DAP,MAP,MKP.With faster and obvious effect.

2).Increase the organic matter of soil and improve soil structure,accordingly largely promote the buffering power of soil.

There two kinds of soil ,sandy and heavy.In sandy soil nutrients s easy to loose ,humic acid could help to stabilize these nutrients and convent them into plants adoptable form,in heavy soil humic acid can increase the capacity of colloid thus preventing soil surface cracking.Humic acid can help to create crumble form to increase water holding capacity and its aeration.Humic acid could chelate the heavy metal thus avoid them absorbed by plants.

3).Regulate PH of soil and increase soil fertility.

The optimum pH range for most plants is between 5.5 and 7.0,Humic acid has direct function to balance the pH of soil,to make soil pH suitable for plants growth.
Humic acid could largely stabilized nitrogen storage and slow release,P is release from AL +in soil,also other microelement is in the form of easy-available by plants, meanwhile the beneficial fungi is active to produce different kind enzymes. to help to create a crumble structure of soil to increase macro elements and micro elements binding capacity and water holding capacity ,thus increase soil fertility.

4).Create good living environment for microbial mass.

Humic acid in Potassium humate could directly improve soil structure thus to create good environment for microbial mas living environment,thus these microbial mas production will help to improve soil structure.

5).Promote the development of chlorophyll, sugars and amino acids in plants and aid in photosynthesis.

6).Promote seed germination in short time,Greatly increase harvest and fruits quality.

Humic acid maximize macro and micro elements absorption like nitrogen,the slow release.Phosphate will greatly released from Fe3+ and Al3+ from soil .As to micro elements humic acid will chelate them into plant adoptable form and then optimize their absorption,also improve soil structure will nourish beneficial micro fungus which will also help soil to increase soil fertility and water holding capacity,thus will greatly increase harvest. Enhanced cell assimilation as well as photosynthesis increase the plant’s sugar and vitamin content, thus the quality of their seeds will be largely increased.

7)Greatly increase plants’ capability countering stress and disease.

Humic acid can mobilize K absorption to regulate the stomata open and close on the leaves also promote metabolism, thus increase the plants’ ability under stressed conditions.

Uses

Base fertilizer: 5-10kgs/ ha, suggested mix with N, P fertilizers.Mixed with Nitrogen fertilizer: 5% of total blend ie. 5kgs of potassium humate per 100kgs of Urea. Also it depends on the soil condition.
Soil irrigation:5-8kgs/ha/time
Caution:Before transferring to drip irrigation tank we suggest dissolve this humate in a small tank and filtering .

Package

  • Woven bags with poly bags inside 25kgs net weight,
    2) Could also provide according to customer’s requirement.

 

Contact Details

Beijing Office:Fengtai District,Beijing

Email:info@cnhumicacid.com

Email:info@humicacidinc.com

Http://www.cnhumicacid.com

Http://www.humicacidinc.com

Skype:info@humicacidinc.com

 

Saint humic acid

Beijing Office :Lizeyayuan Apartment,South West Station Road,Fengtai District,Beijing

Zip code:100072

Jinan Office :West Xinluo St.,High-Tech Dist,Jinan, Shandong,China

Zip:250101

Tel:(+86)-63259599

Email:info@humicacidinc.com

info@cnhumicacid.com

Http://www.humicacidinc.com

Http://www.cnhumicacid.com

Skype:info@cnhumicacid.com

Calcium Lignosulfonate Certificate of Analysis

Calcium Lignosulfonate Certificate of Analysis
   Specification  Test Result
Name

 

 

Calcium lignosulfonate grade one
Appearance      Yellow color  Yellow color
Product Code      GAC-CaLS-1 GAC-CaLS-1
Total Calcium and Magnesium      5%-8%  7.4%
Water-insoluble matter      1.5%max  0.16%
Lignosulphonate      55%min  57.21%
Sugar      Around 7%  7.36%
pH      4-6 5.28
SHIPPING DETAILS
Customer *****
Contract No. 20170417
Vessel name / Voyage No. As on BL
Container No. And seal No. As on BL
Dispatch Date(Loading time) As on BL

Calcium lignosulfonate COA

BEIJING OFFICE:Lizeyayuan Apartment,South West Station Road,Fengtai District,Beijing,China

ZIP CODE:100073

JINAN OFFICE:West Xinluo St.,High-Tech Dist,Jinan, Shandong,China

ZIP CODE:250101

OFFICE LINE:(+86)-10-63388399

OFFICE LINE:(+86)-10-56288685

MOBILE:(+86)-155-8888-9390
EMAIL:info@greenagrochem.com;info@lignincorp.com

HTTP://www.greenagrochem.com

HTTP://www.lignincorp.com

HTTP://www.chinalignin.com

SKYPE:tao9390